Stuck on OCB:LoadImage Fail : Unsupported

Paradise

New member
Joined
Jul 20, 2021
Messages
3
Hi all, this is my first trial with hackintosh and OC but i have some difficulties

my configuration

MB: B550 Aorus Elite V2
CPU: Ryzen 3700x
GPU: RX550 Sapphire Pulse

i used OpenCore 0.7.0 and I followed the guide

somebody did have the same issue?
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
1,303
Check you've got the required UEFI Drivers in OpenCore, if you do enable JumpstartHotPlug in UEFI -> APFS in your config.
 

Paradise

New member
Joined
Jul 20, 2021
Messages
3
Check you've got the required UEFI Drivers in OpenCore, if you do enable JumpstartHotPlug in UEFI -> APFS in your config.
what you mean with UEFI drivers? i have installed these ones
  • HfsPlus.efi
  • OpenRuntime.efi

but with JumpstartHotPlug disabled​

 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
1,303
You should have at least OpenHfsPlus.efi and OpenRuntime.efi in your EFI Drivers folder. Check that setting I mentioned in the config though.
 

Paradise

New member
Joined
Jul 20, 2021
Messages
3
Thanks, I will try this evening
I already have another NVME SSD with WIN10 already install (not the same NVME where I will install Catalina) , could this cause problems?
Should I remove it for the installation)
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
1,303
Shouldn't cause any issues being a different drive. You should be fine. Remove it if you've any worries.
 
Top Bottom