-
Hello Guest. Before you post check the Troubleshooting guide here, Dortania Troubleshooting
[SOLVED] ROG STRIX B550-F GAMING Ethernet
- Thread starter tony535
- Start date
- Joined
- Jul 17, 2020
- Messages
- 45
Problem Solved.
After reading through some links, I found out I needed 2 additional kext in addition to the LucyRTL8125Ethernt kext
RehabMan-FakePCIID and FakePCIID_intel_I225-V kext
Open Hackintool click PCIe under subclass look for your Ethernet Controller
under Device Path section, right click copy device Path
mount your EFI partition place the 2 new kext in the kext folder.
start up ProperTree under DeviceProperties right click on ADD New Child Under
double click where it says New String and paste your Device Path from Hackintool
it should look like this don't forget to load your kext save reboot Hope that help ya
After reading through some links, I found out I needed 2 additional kext in addition to the LucyRTL8125Ethernt kext
RehabMan-FakePCIID and FakePCIID_intel_I225-V kext
Open Hackintool click PCIe under subclass look for your Ethernet Controller
under Device Path section, right click copy device Path
mount your EFI partition place the 2 new kext in the kext folder.
start up ProperTree under DeviceProperties right click on ADD New Child Under
double click where it says New String and paste your Device Path from Hackintool
it should look like this don't forget to load your kext save reboot Hope that help ya
