Hello, I am a graphic designer, I have been working on Apple computers for 10 years.
I have a 2015 iMac and a 2014 MacBook Pro. Machines that are starting to get old.
After much reading on the subject and building a hackintosh, I decided to jump into this universe and give it a try.
I wanted to build a pc to play with my friends and have a machine that evolves over time.
Here is the configuration :
ASUS Rog Strix x570 E Gaming
Ryzen 3700x
32gb RAM Corsair Vengeance LPX 3200mhz
Sapphire Radeon RX 5700 XT Nitro +
Noctua NH-D15
Seasonic FOCUS PX-750w Platinium
macOS is on a Samsung EVO 860 500go SSD
Fenvi T919
Everything works! The first installation was successful, but I have many questions about what to do next.
I specify that I am using the latest version of OpenCore.
I want to do a new installation with the fixes directly from the post-installation section of the OpenCore guide.
Is it possible to know what is: DRM Compatibility Chart for 10.15?
Should I put this with my graphics card? I imagine that should be put in the boot args?
Can I put this right from the start during installation or after once on Catalina?
I am in iMacPro1,1 so I have to put : shikigva=128 in the boot args?
Same question with cpuid_set_cpufamily patch :
Is it possible to put it directly on the boot key during installation or is it better to do it afterwards?
config.plist> root> kernel and copy / paste path
If I understand correctly, afterwards, once on Catalina I just have to open the config.plist, make the changes with the patches, save the file and restart the machine so that OpenCore sees the patches?
Another question, during installation when I can choose my installation disk at the beginning I could not choose a disk, I had to take a tour in the disk utility to format the disk. Alas, impossible to format the disc in HFS only AFPS ... It is a problem I imagine? That's why I want to do a new installation.
I still have the usb mapping to do. I will follow the guide, I hope to do this properly + the graphical start as for bootcamp.
Thanks for your help and thanks for this forum!
I have a 2015 iMac and a 2014 MacBook Pro. Machines that are starting to get old.
After much reading on the subject and building a hackintosh, I decided to jump into this universe and give it a try.
I wanted to build a pc to play with my friends and have a machine that evolves over time.
Here is the configuration :
ASUS Rog Strix x570 E Gaming
Ryzen 3700x
32gb RAM Corsair Vengeance LPX 3200mhz
Sapphire Radeon RX 5700 XT Nitro +
Noctua NH-D15
Seasonic FOCUS PX-750w Platinium
macOS is on a Samsung EVO 860 500go SSD
Fenvi T919
Everything works! The first installation was successful, but I have many questions about what to do next.
I specify that I am using the latest version of OpenCore.
I want to do a new installation with the fixes directly from the post-installation section of the OpenCore guide.
Is it possible to know what is: DRM Compatibility Chart for 10.15?
Should I put this with my graphics card? I imagine that should be put in the boot args?
Can I put this right from the start during installation or after once on Catalina?
I am in iMacPro1,1 so I have to put : shikigva=128 in the boot args?
Same question with cpuid_set_cpufamily patch :
Is it possible to put it directly on the boot key during installation or is it better to do it afterwards?
config.plist> root> kernel and copy / paste path
If I understand correctly, afterwards, once on Catalina I just have to open the config.plist, make the changes with the patches, save the file and restart the machine so that OpenCore sees the patches?
Another question, during installation when I can choose my installation disk at the beginning I could not choose a disk, I had to take a tour in the disk utility to format the disk. Alas, impossible to format the disc in HFS only AFPS ... It is a problem I imagine? That's why I want to do a new installation.
I still have the usb mapping to do. I will follow the guide, I hope to do this properly + the graphical start as for bootcamp.
Thanks for your help and thanks for this forum!