It was a pain, a real pain to install this following Open Core guide it's just too many steps and information. You will need at least half a day to do it!
You also need a Window or Mac for some of the steps, Linux unfortunately is not enough
I think the craziest step to follow it the USB map (https://dortania.github.io/USB-Map-Guide/). This one I did not do it, it was too much for my knowledge...
Anyway, I finally got it running so here are the key points you should take into account if you have the same hardware:
BIOS configuration [MSI B350M Bazooka (MS-7A38)]:
ACPI
Boot parameters:
SMBIOS: iMac14,2
I hope this information helps someone.
You also need a Window or Mac for some of the steps, Linux unfortunately is not enough
I think the craziest step to follow it the USB map (https://dortania.github.io/USB-Map-Guide/). This one I did not do it, it was too much for my knowledge...
Anyway, I finally got it running so here are the key points you should take into account if you have the same hardware:
BIOS configuration [MSI B350M Bazooka (MS-7A38)]:
- Advanced \ PCI subsystem settings -> Above 4GB Memory : Disabled
- Advanced \ ISN Configuration -> XHCI Handoff : Enabled
- Advanced \ Windows OS Config -> CMS : UEFI
ACPI
- SSDT-EC.aml
- SSDT-USBX.aml
- HfsPlus.efi
- OpenRuntime.efi
- AppleALC.kext
- AppleMCEReporterDisabler.kext
- Lilu.kext
- RealtekRTL8111.kext
- VirtualSMC.kext
- Kexts/WhateverGreen.kext
Boot parameters:
<key>7C436110-AB2A-4BBB-A880-FE41995C9F82</key> <dict> <key>boot-args</key> <string>-v debug=0x100 keepsyms=1 alcid=1 npci=0x3000</string> <key>csr-active-config</key> <data>00000000</data> <key>prev-lang:kbd</key> <string>pt_PT:10</string> <=== This is for a Portuguese keyboard. See the guide to find out the layout for your own keyboard </dict> |
SMBIOS: iMac14,2
I hope this information helps someone.