OpenCore boot Hangs

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
The last 3 lines are:
Lilu rtc: @ rtc read failure 1 bytes from 180 E00002C2
VirtualSMC efend: @ no extra rtc memory is present for key erase
AMFILoadTrustedKe

And then it just stops.

I have the correct EC DSDT from the guide, running a 990FXA and an FX 8350 (OC 4.7GHz if it matters).

Thank you.
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142
Do you have an option for HPET in your BIOS? If so enable it. If it's already enabled try adding this SSDT. Add it to your ACPI folder and remember to include it in your config.plist
 

Attachments

  • SSDT-HPET.aml.zip
    875 bytes · Views: 66

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Do you have an option for HPET in your BIOS? If so enable it. If it's already enabled try adding this SSDT. Add it to your ACPI folder and remember to include it in your config.plist
Will try and update you.
 

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Do you have an option for HPET in your BIOS? If so enable it. If it's already enabled try adding this SSDT. Add it to your ACPI folder and remember to include it in your config.plist
Shaneee do I Include this with SSDT-EC-USBX-AMD.aml or replace it?

If include, what keys must go in the config.

I tried both and disabling hpet just in case, nothing.
 
Last edited:

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Sorry for bumping.
 

Attachments

  • IMG_20200502_152531.jpg
    IMG_20200502_152531.jpg
    3.4 MB · Views: 43

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142
Check your BIOS again. Disable CSM and if you have Above4G enable it and remove the npci boot arg.
 

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Check your BIOS again. Disable CSM and if you have Above4G enable it and remove the npci boot arg.
Thanks again for your reply. I do not have a CSM toggle (but an "is version" set to other OS).

I also do not have Above4G as an option either.

Again this is a 990FXA-UD3
 

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Check your BIOS again. Disable CSM and if you have Above4G enable it and remove the npci boot arg.
After double checking everything, resetting bios, etc. The same errors remain and hang. My FX8350 is over locked @4.7ghz but even at stock it still hangs. I am also running raid on the bios side if that might not help.
\
Edit: Added config, forum doesn't allow plist files so its renamed to .txt.
 

Attachments

  • config.txt
    36.2 KB · Views: 15

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Include this SSDT, https://github.com/dortania/OpenCore-Desktop-Guide/raw/master/extra-files/SSDT-EC-USBX-AMD.aml

You are missing Whatevergreen.kext and one for your LAN too.

Remove alcid=1 and USBBusFix=Yes from your boot args.

I'm stilling hanging, this time at RTC only single ram bank

Attached is my new Config.plist, I believe I have it setup correctly?

All kexts added under Kernel Add,


AppleALC.kext
IOBDStorageFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext
Lilu.kext
RealtekRTL8111.kext
WhateverGreen.kext
VirtualSMC.kext


remaining kexts (those missing Contents/MacOS):

AHCIPortInjector.kext
XLNCUSBFix.kext

These are not listed in the config, as I was unsure what to do with them.

All kexts are in BOOT/EFI/OC/Kexts/
 

Attachments

  • config.plist.txt
    38.1 KB · Views: 2

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142
Not sure why you've got these,
IOBDStorageFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext

Remove them. Read the OpenCore guide or OpenCore docs to see how to add kexts.
 

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Not sure why you've got these,
IOBDStorageFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext

Remove them. Read the OpenCore guide or OpenCore docs to see how to add kexts.
They were included in the zip from the vanilla guide. I'll try to find the part about kexts in the guide but searching yesterday I didn't find specifics on if they go in the config and if so, where.
 

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
Not sure why you've got these,
IOBDStorageFamily.kext
IOUSBFamily.kext
IOUSBHostFamily.kext
IOUSBMassStorageClass.kext

Remove them. Read the OpenCore guide or OpenCore docs to see how to add kexts.
Shane, after doing research and reading documentation, I've completed everything necessary and everything you've suggested.

I am still hanging on VirtualSMC stating authenticated reboot not authorized.
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16

drake90001

New member
AMD OS X Member
Joined
May 2, 2020
Messages
16
It's not the VirtualSMC it's sticking on it'll be something just before it. Check this, https://dortania.github.io/OpenCore...tion-begins-previous-shutdown-hpet-hid-legacy
Installation complete. Systems boots. Standard green button and tearing artifacts even with webdrivers. Gpu isn't being detected. NVRAM issue?

Edit: update security patch 2020-001 or whichever, was able to install webdrivers.

I am however still getting random black screen and USB shut off. Trying to diagnose.
 
Last edited:
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.