[Log:Exitibs:Start] 2022-06014t21:39:19

Haza

Member
Joined
Jun 14, 2022
Messages
82
Hi!
I use an open core 0.6.1.
So when trying to install mac os, big sure stops at [Log:Exit is:Start] 2022-06014t21:39:19 and freezes, maybe someone has encountered such a problem?

I'll attach the photos
CPU: Athlon 3000g
RAM: Samsung 3x4 12 gb
Motherboard: Msi b450m pro vfh max

 
Last edited:

Middleman

Active member
Joined
Jan 29, 2021
Messages
395
listen, and if you try to install mac os mojave (well, or high sierra), will it work?
No point to try High Sierra, your IGPU is not supported. For the Monterey build I’ve had to disable the Vega64 because I felt it was clashing with the onboard IGPU. Otherwise it should boot like my VCS has.
 

Haza

Member
Joined
Jun 14, 2022
Messages
82
No point to try High Sierra, your IGPU is not supported. For the Monterey build I’ve had to disable the Vega64 because I felt it was clashing with the onboard IGPU. Otherwise it should boot like my VCS has.
and another question, I found mac os monterey version 12.4. Nothing terrible will happen?
 

Middleman

Active member
Joined
Jan 29, 2021
Messages
395
What was the issue that you were having with Opencore? It should be quite easy to do. You format it as a Fat32 drive and name the drive as EFI. Put a folder named com.recovery.apple.boot in the root directory and place the two Monterey chunk list and DMG files into that folder from Macrecovery. Then in the root directory of your drive copy over your EFI config folder for your system (the one I gave you). Then reboot.
 

Haza

Member
Joined
Jun 14, 2022
Messages
82
What was the issue that you were having with Opencore? It should be quite easy to do. You format it as a Fat32 drive and name the drive as EFI. Put a folder named com.recovery.apple.boot in the root directory and place the two Monterey chunk list and DMG files into that folder from Macrecovery. Then in the root directory of your drive copy over your EFI config folder for your system (the one I gave you). Then reboot.
I did it, but with monterey, opencore does not want to load, the bios freezes on post code 50
 

Middleman

Active member
Joined
Jan 29, 2021
Messages
395
Right. Well, I have been to figure out what the problem of it is (why it isn’t booting on your system). I’ve got some ideas.
I think it is most likely to do with your GPU setting. If you try this - under UEFI in the config.plist check under Quirks and see if Vector Acceleration is turned on. You may have to turn it off. As I noticed this feature also prevented my VCS from booting.
 

Haza

Member
Joined
Jun 14, 2022
Messages
82
Right. Well, I have been to figure out what the problem of it is (why it isn’t booting on your system). I’ve got some ideas.
I think it is most likely to do with your GPU setting. If you try this - under UEFI in the config.plist check under Quirks and see if Vector Acceleration is turned on. You may have to turn it off. As I noticed this feature also prevented my VCS from booting.
Vector acceleration is disabled in the config
 

Haza

Member
Joined
Jun 14, 2022
Messages
82
Okay. @Haza would you mind to do something for me? Could you send me a Clover BIOS dump of your system? If you have Clover running just press F4 at the menu - it will save into your EFI folder under ACPI/origin
Sorry I didn't drop the file, I was very busy, I'll drop it to you as soon as I'm a little free
 
Top Bottom