Instant wake up after sleep

zk2004mb

New member
AMD OS X Member
Joined
Jun 7, 2020
Messages
25
Here is the result from wake up log:

2021-01-23 04:12:52.869925-0500 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11


2021-01-23 04:12:52.869927-0500 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11


Did anyone know what's the reason behind it?

Thanks!
 

baronerosso

Donator
Donator
AMD OS X Member
Joined
Sep 29, 2020
Messages
103
I have the same problem.
Sleep was OK only at first reboot after BigSur installation, and next .. instant wake
 

AudioGod

Guru
Guru
Joined
Nov 7, 2020
Messages
1,386
Here is the result from wake up log:

2021-01-23 04:12:52.869925-0500 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11


2021-01-23 04:12:52.869927-0500 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11


Did anyone know what's the reason behind it?

Thanks!
Hi,
If either of you are using a AIO like a Corsair H100i etc etc etc that needs a usb internal header connection then you need to use this patch to fix sleep properly.


Or you can just disconnect the Internal USB Connection to the AIO to test it out before you apply the patch.
 

zk2004mb

New member
AMD OS X Member
Joined
Jun 7, 2020
Messages
25
Hi,
If either of you are using a AIO like a Corsair H100i etc etc etc that needs a usb internal header connection then you need to use this patch to fix sleep properly.


Or you can just disconnect the Internal USB Connection to the AIO to test it out before you apply the patch.
It didn't seem to be the same problem as stated in the fix.
I checked the cause of wake up and it did not match what's in the guidance.


2021-01-23 12:49:20 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 45 secs


2021-01-23 12:50:05 -0500 Sleep Entering Sleep state due to 'Maintenance Sleep': Using AC (Charge:0%) 23 secs


2021-01-23 12:50:28 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 46 secs


2021-01-23 12:51:14 -0500 Sleep Entering Sleep state due to 'Maintenance Sleep': Using AC (Charge:0%) 61 secs


2021-01-23 12:52:15 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 4 secs


2021-01-23 12:52:19 -0500 Wake DarkWake to FullWake from Normal Sleep [CDNVA] : due to UserActivity Assertion Using AC (Charge:0%)

I'm using a NZXT internal fan hub though. I guess it might cause the problem but I do have USB map to cover the internal usb2.0 port.
 

AudioGod

Guru
Guru
Joined
Nov 7, 2020
Messages
1,386
It didn't seem to be the same problem as stated in the fix.
I checked the cause of wake up and it did not match what's in the guidance.


2021-01-23 12:49:20 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 45 secs


2021-01-23 12:50:05 -0500 Sleep Entering Sleep state due to 'Maintenance Sleep': Using AC (Charge:0%) 23 secs


2021-01-23 12:50:28 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 46 secs


2021-01-23 12:51:14 -0500 Sleep Entering Sleep state due to 'Maintenance Sleep': Using AC (Charge:0%) 61 secs


2021-01-23 12:52:15 -0500 DarkWake DarkWake from Normal Sleep [CDN] : due to GPP2 GPP3 GPP4 GPP5 GPP6 GPP7 GPP9 X162 GPPA GPPB GPPC GPPD GPPE GPPF GP10 GP11/ Using AC (Charge:0%) 4 secs


2021-01-23 12:52:19 -0500 Wake DarkWake to FullWake from Normal Sleep [CDNVA] : due to UserActivity Assertion Using AC (Charge:0%)

I'm using a NZXT internal fan hub though. I guess it might cause the problem but I do have USB map to cover the internal usb2.0 port.
Try disconnecting it and see if it makes a difference, it takes two seconds too try buddy.
If your using T919 combo card then they break sleep under big sur too.
I don’t know if you do or don’t have one, I’m just throwing it out there for you.
 

zk2004mb

New member
AMD OS X Member
Joined
Jun 7, 2020
Messages
25
Try disconnecting it and see if it makes a difference, it takes two seconds too try buddy.
If your using T919 combo card then they break sleep under big sur too.
I don’t know if you do or don’t have one, I’m just throwing it out there for you.
Really appreciate your help! I'm gonna try it tomorrow. It's a SFF build with custom loop. So open the case and remove the hub might be a little bit harder than you expected lollll. I actually hid the hub behind some fittings for cable management.
 

baronerosso

Donator
Donator
AMD OS X Member
Joined
Sep 29, 2020
Messages
103
I have fenvi t919 and I did the test.

With Fenvi t919: instant wake up after sleep.
With Fenvi 1200: instant wake up after sleep.
Removing all with only video card in PCI: instant wake up after sleep.
 

AudioGod

Guru
Guru
Joined
Nov 7, 2020
Messages
1,386
Really appreciate your help! I'm gonna try it tomorrow. It's a SFF build with custom loop. So open the case and remove the hub might be a little bit harder than you expected lollll. I actually hid the hub behind some fittings for cable management.
As I’m sure you already know and as Annoying as it is sometimes the best way to fault find is to strip back to bare bones and test from there just so you can write off any other devices being part of the problem.
 

barmyman

New member
AMD OS X Member
Joined
Dec 1, 2020
Messages
5
Use this little babe, put it inside ACPI folder and keep in mind to update config.plist with info respectively.
 

Attachments

  • SSDT-SLEEP.aml.zip
    671 bytes · Views: 17

joshuawins99

New member
AMD OS X Member
Joined
Jun 28, 2020
Messages
1
Use this little babe, put it inside ACPI folder and keep in mind to update config.plist with info respectively.
Hi, I am having exactly the same issue as the original poster. I understand what you are trying to accomplish with the .aml, but wouldn't you have to specify each different port that the sleep log calls out? As it is currently, this .aml does not solve my issue.
 

barmyman

New member
AMD OS X Member
Joined
Dec 1, 2020
Messages
5
Hi, I am having exactly the same issue as the original poster. I understand what you are trying to accomplish with the .aml, but wouldn't you have to specify each different port that the sleep log calls out? As it is currently, this .aml does not solve my issue.
You might be right about the port specification, but as for me - i found this .aml on some github page, so can't help you out here :(
 
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.