Direct boot

Pulsar

Member
AMD OS X Member
Joined
Jul 26, 2021
Messages
61
Hi guys,

I was wondering how I could set, aside from the BIOS settings, the direct boot of my Hack without having to manually select the boot disk all the time.

Thanks (y)
 

Aluveitie

Donator
Donator
AMD OS X Member
Joined
May 2, 2020
Messages
895
You can set the default with ctrl + enter, then set the timeout to 0. But always good to have a boot stick with an EFI that has the picker enabled.
 

RyzeCooker

Donator
Donator
AMD OS X Member
Joined
May 3, 2020
Messages
286
Also check what is set under Preferences > Startup Disk under macOS. Every time I do an NVRAM reset it defaults to my Windows drive and I have to manually set it again.
 

Pulsar

Member
AMD OS X Member
Joined
Jul 26, 2021
Messages
61
You can set the default with ctrl + enter, then set the timeout to 0. But always good to have a boot stick with an EFI that has the picker enabled.

Thanks for the reply guys.

Timeout 0 where should I set it? From the config file?
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142
Thanks for the reply guys.

Timeout 0 where should I set it? From the config file?

Yeah it's in the config under Misc -> Boot
 

Pulsar

Member
AMD OS X Member
Joined
Jul 26, 2021
Messages
61
Hello everybody!

Thanks for the answers.

I pressed enter + crtl on boot selecting the partition with the Hack and set timeout 0 in the config. NVRAM reset.

But it keeps giving me the same screen on boot.
 

Shaneee

The AMD Guy
Staff member
Administrator
Joined
Mar 13, 2020
Messages
2,142
Set ShowPicker to false and it'll auto boot to the default device.
 

Pulsar

Member
AMD OS X Member
Joined
Jul 26, 2021
Messages
61
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.