- Joined
- Nov 7, 2020
- Messages
- 1,386
Change it on the Efi your using for high Sierra, you don’t need to reinstallDid i Need to change It and reinstall Mac? or i can change It inside the efi of boot pendrive and Just boot the Mac High sierra?
Change it on the Efi your using for high Sierra, you don’t need to reinstallDid i Need to change It and reinstall Mac? or i can change It inside the efi of boot pendrive and Just boot the Mac High sierra?
now the audio is going.. ty..... how i can istall the driver video?Change it on the Efi your using for high Sierra, you don’t need to reinstall
To save me time explaining just goto that thread I linked for you yesterday and it’s all explained in detail on there buddy.now the audio is going.. ty..... how i can istall the driver video?
hi im writing you from Mac now and I see that the OS version is 17g66 and inside Nvidia web driver there isn't this type of OSTo save me time explaining just goto that thread I linked for you yesterday and it’s all explained in detail on there buddy.
To answer your question, open Config.plist, locate Misc - Boot - HideAuxiliary and set it to false. Then the recovery mode will be shown after restart.@AudioGod changedSecureBootModel
to j137. Changed PCI slots speed to Gen3. And removed npci=0x200 + enabled above 4G. Seems everything is ok.
One tiny question. When the OC boot appears there is no recovery mode. Is it intentionally? Command+R doesn't work. Any suggestions? Thanks!
Or just press the space bar when you get to the bootpickerTo answer your question, open Config.plist, locate Misc - Boot - HideAuxiliary and set it to false. Then the recovery mode will be shown after restart.
i just want to say you thanks! Finally mac os Big sur work i have just some usb port that doesnt work but its ok.... ty so muchOr just press the space bar when you get to the bootpicker
You need to ask one of the OC Devs that question really. As of now there’s no boot flag for it but they might give us one now that big Navi has support in the new beta.What a day.
Managed to buy an rx6800 in the AMD.com drop today and the 11.4 beta 1 brings support for it!
Which brings us back to the question if it will be possible to disable SAM in opencore and enable it in BIOS for Windows.
Hello.
Thanks for your upload.
I with a Gigabyte Aorus X570 ultra, with a Ryzen 7 5800x, Geforce GTX 1060.
I tried your EFI only adding the Serial, UUID... to install OSX 10.13.6 (last version compatible with my Graphic Card).
It is starting up and stay blocked because mouse is not working (I have an HP with a dongle and a regular Apple mouse).
Arrows on keyboard are not working. If I hit space, it is going to Language choice and the menu Restore, Install, get help, Disk Utility.
Install is not crashed, just no input possible.
I have no experience with OpenCore (I was using Clover on Intel Mobos).
I this stage, I don't know what I can do...
If someone can help...
Thanks!!
Solved the installation problem: the mouse was not working because USB port was not working during install.If you want to use a 1060 then you’re going to need to use High Sierra as your OS and you need to add nv_disable=1 to the boot arguments and remove agdpmod=pikera from there too.
Check on page one of this thread for info on how to put your smbios details into the OpenCore EFI correctly.
You need to swap the Ethernet kext I’m using for the older version v1.2.5 compatible with High Sierra, (but I see you say you have done that)Solved the installation problem: the mouse was not working because USB port was not working during install.
After installation the Ethernet is not working:
OS: High Sierra 10.13.6
MOBO: Aorus X570 Ultra v1.2
Kext: SmallTreeIntel82576 v1.2.5 (version for Sierra) (listed in config.plist, kenel, add)
Audio ALC 1220-VB also not working with alcid=29 but I can see that later.
Any idea. Thanks in advance.
Ethernet is now working. I changed MinKernel for SmallTreeIntel82576.kext from 19.0.0 to 12.0.0 (in Kernel > Add >3 > MinKernel)You need to swap the Ethernet kext I’m using for the older version v1.2.5 compatible with High Sierra, (but I see you say you have done that)
Releases · khronokernel/SmallTree-I211-AT-patch
Patched SmallTree kext for I211-AT support. Contribute to khronokernel/SmallTree-I211-AT-patch development by creating an account on GitHub.github.com
Change alcid=29 to 7 or 1.
My EFI is very much setup for Big Sur or Catalina but it doesn’t take much to make it work for anything older.
Hi and thanks for your valuable work. I try hard to get all Waves Plugins to work in Logic X Pro. However some of them fail.ScreenShots & Benchmark Results Continued
View attachment 2234
View attachment 2233
View attachment 2671
View attachment 2032
Such great news! Can’t wait to test it outWhat a day.
Managed to buy an rx6800 in the AMD.com drop today and the 11.4 beta 1 brings support for it!