AudioGod's Gigabyte Aorus X570 Pro, Pro Wifi & Ultra - Big Sur OpenCore 0.6.5 EFI

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
This is my first fully functional Ryzen Hackintosh after many many years of intel builds and when I say fully functional I mean just that.
Everything is working bar SideCar of course as there's no IGPU and I'm using SMBios iMacPro1,1 but as for everything else goes like proper sleep, Wake, All iCloud functions, Handoff, AppleWatch Unlock etc etc all works beautifully.
I have fully mapped out USB manually on all ports and there's no micro stutters or freezes or anything else strange that you can think of.


Build Spec
  • CPU: Ryzen 9 5900X
  • Motherboard: Gigabyte AORUS X570 Pro (Bios Revision - F31)
  • RAM: Corsair Pro Vengeance 32GB DDR4 3600Mhz (Tuned)
  • Graphics: Sapphire RX 5700 XT
  • Case : Lian Li PC-O11DW Dynamic.
  • NVMe: Samsung 970 EVO 1TB & Samsung 970 EVO Plus 1TB
  • SSD: Samsung 860 EVO 1TB
  • HDD: Seagate Barracuda 1TB
  • PSU: EVGA SuperNOVA 850 G5, 80 Plus Gold 850W
  • WiFi-Bluetooth: ABWB BCM94360CS2 802.11AC WI-FI With Bluetooth 4.0 PCIe
  • Sound: Onboard & Native Instruments Audio 6
  • Cooling : Arctic Liquid Freezer II 360 AIO
  • Installed Operating Systems: Big Sur 11.1 - Windows 10 Pro
  • Bootloader: OpenCore 0.6.4

IMG_4564.jpeg
ACPI SSDT's
  • SSDT-EC-USBX (Fake EC & USB power tables)
  • SSDT-PLUG (CPU power management)
  • SSDT-SBRG (more power management)
  • SSDT-SBUS-MCHC (Correct SMBus)
  • SSDT-XHC (USB rename's)

Kexts
  • Lilu
  • VirtualSMC
  • WhateverGreen
  • AppleALC
  • SmallTreeIntel82576
  • AppleMCEReporterDisabler
  • AMDRyzenCPUPowerManagement
  • SMCAMDProcessor
  • USBMap

What Works
Sound including the case's front headphones 3.5mm port
Ethernet PortIMG_4566.jpeg
WiFi / Bluetooth
USB Type C, 3.0 & 2.0 (All ports Mapped & Open)
AirDrop
iCloud
Hardware Acceleration
iMessages
Facetime
Sleep & Wake
Sleep and Shutdown via the Power Button
Power Nap
Handoff
Netflix on Safari browser
Continuity
Apple Watch Unlock​
What Doesn't Work
SideCar
Bios Settings
  • Enter BIOS -> Press Delete -> Enter Setup
  • Save & Exit -> Load Optimized Defaults
  • Boot -> CSM Support -> Disabled
  • Boot -> Fast boot -> Disabled
  • Boot -> Secure boot -> Disabled
  • Settings -> IO Ports -> Above 4G Decoding -> Enabled
  • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto


ScreenShots & Benchmark Results

Screenshot 2020-12-22 at 21.19.12.jpg

Screenshot 2020-12-08 at 23.34.26.png

Screenshot 2020-12-13 at 00.42.49.png

Screenshot 2020-12-08 at 23.35.58.png

Screenshot 2020-12-08 at 23.10.06.png

Screenshot 2020-12-09 at 00.19.49.png

Screenshot 2020-12-08 at 23.12.54.png


EFI Install Notes
Using PlistEdit Pro add your details by modifying the following
453128831_Screenshot2020-01-16at19_25_01.thumb.png.7a9beac3ccc0096941fc4a0ec07b8248.png
Note - If your not using a 5700 XT or any other Navi GPU then remove agdpmod=pikera from the boot arguments.

If you need help then feel free to get in touch and do let me know how my EFI works for you.
The EFI has now been updated to the my latest version.
Changes made include,
  • AppleALC 1.5.6,​
  • WhateverGreen 1.4.6,​
  • OpenCore Updated to Revision 0.6.5,​
  • OpenCanopy is Enabled as Standard,​
  • New OpenCanopy Icons,​
  • SSDT-XHC has been rewritten and is now natively correct for the X570 Pro, Pro Wifi and Ultra,​
  • USBMap is now universally correct for the X570 Pro, Pro Wifi and Ultra,​
  • Plus other minor tweaks and changes to the config.​
PLEASE NOTE - The EFI has now been expanded and usb has been fully mapped to included the X570 Pro, Pro Wifi and Ultra. No changes to the EFI are needed for any of the above boards, Just add your info and away you go. If you want to use the internal intel wifi and bluetooth combo card then make sure you download and instal the correct kexts from here. https://github.com/OpenIntelWireless

Current EFI - OpenCore 0.6.5 (04/01/2021) SMBios iMacPro1,1​
 

Attachments

  • Gigabyte X570 Pro 065 EFI 040121.zip
    3.3 MB · Views: 102
Last edited:

Aenterhy

New member
May 3, 2020
1
1
3
Great config, thanks for such detailed information! Using this I was able to fix my mapping issue on similar config :)
 
  • Like
Reactions: AudioGod

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
I will be updating my EFI alongside OpenCore Releases so if you’re using it be sure to check in from time to time for updates.
 
  • Like
Reactions: Aenterhy

pancheesy4sheezy

New member
Jun 1, 2020
24
6
3
This is one of the best posts I've seen because it's so detailed.

Any clue if this works on a Aorus x570 Elite? I'm stuck in the efi creation process and wanna try for big sur. We have similar parts, but the motherboard.
 
  • Like
Reactions: AudioGod

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
This is one of the best posts I've seen because it's so detailed.

Any clue if this works on a Aorus x570 Elite? I'm stuck in the efi creation process and wanna try for big sur. We have similar parts, but the motherboard.
Thanks for the kind words buddy.
I would say yes it will but disable the usbmap.kext to start with as the elite lacks usb-c ports so my map will be wrong but my SSDT-XHC.aml should be fine and allow full usb so yeah give it a try with the usb.kext disabled and let me know how it works for you please? :)
Also if it boots up ok then go into your energy saver and check to make sure you have power nap and start up automatically after power failure and if that’s all there then check sleep and wake and shut down and make sure there’s no long unnecessary hangs before it does the process.
 

pancheesy4sheezy

New member
Jun 1, 2020
24
6
3
I took out the usbmap.kext and edited it off the plist. that was about it. I'm not gonna lie, even with videos, tutorials, and help, I'm definitely an idiot when it comes to stuff like this on the hackintosh in general.

Don't know if it helps,

But I have:

Ryzen 5 3600X
Aorus x570 elite
Gigabyte 5700 XT
 

pancheesy4sheezy

New member
Jun 1, 2020
24
6
3
Nope...didn't add anything. I'm pretty hackintosh illiterate even though I've taken hours and hours reading guides and videos, but I do appreciate your help. Legitimately. You're like the only dude that has ever responded to anything I've ever typed with knowlege.
 

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
@pancheesy4sheezy Download GenSMBIOS from here - https://github.com/corpnewt/GenSMBIOS
Then do the following,

Run GenSMBIOS, pick option 1 for downloading MacSerial and Option 3 for selecting out SMBIOS. This will give us an output similar to the following:

#######################################################
# iMacPro1,1 SMBIOS Info #
#######################################################

Type: iMacPro1,1
Serial: C02YX0TZHX87
Board Serial: C029269024NJG36CB
SmUUID: DEA17B2D-2F9F-4955-B266-A74C47678AD3



The order is Product | Serial | Board Serial (MLB)

The Type part gets copied to Generic -> SystemProductName.

The Serial part gets copied to Generic -> SystemSerialNumber.

The Board Serial part gets copied to Generic -> MLB.

The SmUUID part gets copied to Generic -> SystemUUID.

453128831_Screenshot2020-01-16at19_25_01.thumb.png.7a9beac3ccc0096941fc4a0ec07b8248.png
 
  • Like
Reactions: pancheesy4sheezy

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
@pancheesy4sheezy Here you go mate,
I have entered fresh details for you and disabled the usbmap.kext.
give this a try if the steps above confuse you buddy. :)

Replace the config.plist in the EFI with this one and try the installer again.

Soon as you download it il delete the download so nobody else can use the details. :)
 
  • Like
Reactions: pancheesy4sheezy

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
okay. edited! gonna test it again
Good Luck,
if it don’t work then try again using the plist I made for you in my last post.

By the way I double checked those details I created for you to make sure they are not being used by any other user and they are clean and exclusive so if you didn’t do that yourself then use my plist instead.
Clean details only really matter when your logging into iCloud.
 
  • Like
Reactions: pancheesy4sheezy

pancheesy4sheezy

New member
Jun 1, 2020
24
6
3
AUDIOGOD, YOU ARE A GOD SEND.

The installer is running! I legitmately cannot thank you enough! I appreciate you responding to me and helping me when you clearly did not need to and this is after hijacking your thread. People like you are why this community is amazing!
 
  • Like
Reactions: AudioGod

AudioGod

Active member
Original poster
Nov 7, 2020
181
70
28
London U.K.
AUDIOGOD, YOU ARE A GOD SEND.

The installer is running!
Awesome, I’m here if you need any help mate and once your booted up check the things I said to check a good few posts ago and report back.

I can probbaly sort your USB properly out for you too And make you a map for your board. (It will run fine without it too temp)

Oh and if your not already then make sure you use the bios setting I have laid out on my main post. That’s very very important.
 
  • Like
Reactions: pancheesy4sheezy

pancheesy4sheezy

New member
Jun 1, 2020
24
6
3
Awesome, I’m here if you need any help mate and once your booted up check the things I said to check a good few posts ago and report back.

I can probbaly sort your USB properly out for you too And make you a map for your board. (It will run fine without it too temp)
Wow. I cannot thank you enough. It's currently installing so it'll be awhile, but WOW. My USB Map on my Catalina was trash. I have one USB-C/lightning port on my case and before I updated to 5.4 (previously on 5.2 Catalina), it was working properly then it died. I tried my hand, but I kept on bricking my computer and I got tired of destroying it so I settled.

update/edit: Installed successfully! currently trying to mount the HD to copy the EFI over. Thanks!!!
 
Last edited:
  • Like
Reactions: AudioGod