3950x, Gigabyte Aorus Master X570, Big Sur 11.0.1, OC 0.6.3

olbo

Member
Jun 26, 2020
41
20
8
I woulds suggest F11 BIOS because F20 has problems with recovery mode and installer
 

davemaster

New member
Jul 20, 2020
7
0
1
F20 BIOS

Disabled
  • Fast Boot
  • Secure Boot
  • CSM
Enabled
  • Above 4G decoding
  • XHCI Hand-off
F11 BIOS is also fine

Thanks.
Im using your config, but I cant disable CSM with RX 580. With GTX 1080 works fine. Im using F20 bios.

I recommend, Good Config for x570 Aorus Master.
 

wjensen

New member
Sep 3, 2020
1
0
1
Hi there,
I have a little question for you Olbo ; In your EFI folder there is a .plist file dedicated to your 5700XT GPU.
Could you tell me how to use it ? Are you supposed to copy it somewhere in your config.plist file ?

Thanks a lot for your help.
Regards, Will.
 

olbo

Member
Jun 26, 2020
41
20
8
Hi there,
I have a little question for you Olbo ; In your EFI folder there is a .plist file dedicated to your 5700XT GPU.
Could you tell me how to use it ? Are you supposed to copy it somewhere in your config.plist file ?

Thanks a lot for your help.
Regards, Will.

It's a custom power play table for my RX 5700 (non XT), I've not bothered to include it as I've found it to be unstable compared to the default apple provides
 

Vye

New member
Sep 4, 2020
22
6
3
Hi friends

I have the same MotherBoard. Should I need to switch back to "F11" from "F20" to make the hack work??
I was struggling to boot for days. no Matter what config.plist parameters are change it will stuck at "[EB|#LOG:EXITBS:START] 2020-09-04T09:56:13"
I also tried with Dotaina troubleshooting but no luck. I do not intend to copy paste your EFI . I need help to figure it out happy to do whatever change you suggest.

Now I gonna Startover from scratch and trashing the existing EFI (as recommended to me).

Thanks
 

slehc84

New member
Jul 5, 2020
14
8
3
Thank you for your efforts on this. It works with F20, Im using a rev 1.1 Master an Aorus rx5700XT and all NVMES one with Catalina, one with windows and third as a joint transfer drive with extended FAT. Now I just need to get my Titan ridge to play nicely.
 

Vye

New member
Sep 4, 2020
22
6
3
Thank you for your efforts on this. It works with F20, Im using a rev 1.1 Master an Aorus rx5700XT and all NVMES one with Catalina, one with windows and third as a joint transfer drive with extended FAT. Now I just need to get my Titan ridge to play nicely.

That is Awesome mate....
But I am still can't get it working...
 
  • Like
Reactions: AMDPUSH

Vye

New member
Sep 4, 2020
22
6
3
I enabled the 4g decode and disabled csm...I did even touch XMP profile..Is there any thing I need to change in XMP ?
If So share with me...
Thanks For your response
 

slehc84

New member
Jul 5, 2020
14
8
3
I enabled the 4g decode and disabled csm...I did even touch XMP profile..Is there any thing I need to change in XMP ?
If So share with me...
Thanks For your response
I sent you a mail as it is kinda off topic
 

slehc84

New member
Jul 5, 2020
14
8
3
I enabled the 4g decode and disabled csm...I did even touch XMP profile..Is there any thing I need to change in XMP ?
If So share with me...
Thanks For your response
Try looking at this is for an elite board not a master like ours


 

olbo

Member
Jun 26, 2020
41
20
8
Updated for OC 0.6.1, I went through Differences.pdf and there's nothing additional to add for this board
 

Attachments

  • EFI.zip
    6.6 MB · Views: 62

olbo

Member
Jun 26, 2020
41
20
8
Hi friends

I have the same MotherBoard. Should I need to switch back to "F11" from "F20" to make the hack work??
I was struggling to boot for days. no Matter what config.plist parameters are change it will stuck at "[EB|#LOG:EXITBS:START] 2020-09-04T09:56:13"
I also tried with Dotaina troubleshooting but no luck. I do not intend to copy paste your EFI . I need help to figure it out happy to do whatever change you suggest.

Now I gonna Startover from scratch and trashing the existing EFI (as recommended to me).

Thanks

F20 works, but is inconsistent. I often got graphical glitches and I was unable to boot into safe mode. I've since reverted to F11 BIOS. Since the board contains a switch for the BIOS you can try with both F11 and F20. I think your problem is with RebuildAppleMemoryMap as newer BIOS have trouble with it being set to NO, try enabling it. I also just uploaded a new EFI for OC 0.6.1 which contains various improvements

If none of this works, ensure you enable all logging utilities offered by OpenCore and please paste logs here. You can get the logs fromthe USB drive you attempt to boot from.
 

Vye

New member
Sep 4, 2020
22
6
3
F20 works, but is inconsistent. I often got graphical glitches and I was unable to boot into safe mode. I've since reverted to F11 BIOS. Since the board contains a switch for the BIOS you can try with both F11 and F20. I think your problem is with RebuildAppleMemoryMap as newer BIOS have trouble with it being set to NO, try enabling it. I also just uploaded a new EFI for OC 0.6.1 which contains various improvements

If none of this works, ensure you enable all logging utilities offered by OpenCore and please paste logs here. You can get the logs fromthe USB drive you attempt to boot from.

Hi Olbo

I have a successful Hackintosh with the "F21" bios...What I did to make it work is Diabled the "SetupVirtualMaps" Quirk in Booter section add added "npci=0x2000 shikigva=128" to my bootargs. I needed the "npci=0x2000" even though I had Above 4G Decoding Enabled.It is weird to keep both. My bootArgs looks like this "-v keepsyms=1 debug=0x100 npci=0x2000 alcid=3 agdpmod=pikera shikigva=128". Every thing works perfectly..but as you said Sleep and Microphone is not working...As of OpenCore v0.6.0.....


Thanks for your reply...
 
  • Like
Reactions: AMDPUSH

AMDPUSH

New member
May 2, 2020
25
1
3
Thank you for your efforts on this. It works with F20, Im using a rev 1.1 Master an Aorus rx5700XT and all NVMES one with Catalina, one with windows and third as a joint transfer drive with extended FAT. Now I just need to get my Titan ridge to play nicely.

Hi have you receive your titan ridge ?
 

Niko

New member
May 17, 2020
3
0
1
I've upgraded from my original setup to your 0.6.1 and it works really well. However, my FENVI's Bluetooth is no longer recognised by the OS. I'm getting Bluetooth not available in the menubar. I saw that you had various original bluetooth kexts in there that you couldn't upload because of the size limit. However, mine is a native card that works without any kexts. Did you do anything to your config/setup that may interefere with this? I have tried pinpointing the issue, but no luck so far :/
 

slehc84

New member
Jul 5, 2020
14
8
3
Hi have you receive your titan ridge ?
I did , I flashed it like on the CMP , it would not boot the system unless a DP was plugged in . It also caused problems in my windows side. So I removed it and put it in my CMP 4.1/5.1 running mojave and opencore 6.1 and it works great . I have a rev 02 Titan ridge coming this week, will try agin , but do not recommend flashing them on a hackingtosh
 
  • Like
Reactions: AMDPUSH

olbo

Member
Jun 26, 2020
41
20
8
I've upgraded from my original setup to your 0.6.1 and it works really well. However, my FENVI's Bluetooth is no longer recognised by the OS. I'm getting Bluetooth not available in the menubar. I saw that you had various original bluetooth kexts in there that you couldn't upload because of the size limit. However, mine is a native card that works without any kexts. Did you do anything to your config/setup that may interefere with this? I have tried pinpointing the issue, but no luck so far :/

Are you able to see the device with hackintool?

I am not doing anything special, nor did anything change from 0.6.0 -> 0.6.1 which would affect bluetooth


Check that the kexts are up to date:https://dortania.github.io/OpenCore-Install-Guide/ktext.html#wifi-and-bluetooth


Failing that, are you able to provide any logs of the failing bluetooth adapter to help us assist you?
 

slehc84

New member
Jul 5, 2020
14
8
3
Well stuck the v2 of the Titan ridge in my X570 Master. The monitor works, the sound works, but the strange thing is in Thunderbolt on system information It says no drivers loaded, will have to dig further on this problem
 
  • Like
Reactions: AMDPUSH