Search results

  1. winterwolf

    Big Sur on X570 Creator (sleep/wake works)

    Excellent. Have you updated to 11? If so, does the thunderbolt work?
  2. winterwolf

    Big Sur on X570 Creator (sleep/wake works)

    Curious what your status is with this. Been thinking about installing Big Sur, but I need both 10G and Thunderbolt and haven't seen anyone anywhere confirm that they can get both working on Big Sur. Anyone out there have experience/actually been able to get both these working on BS?
  3. winterwolf

    how to DUAL Vega 64

    Does FCPX natively support multi GPUs natively? I know you can select which GPU to use, but not sure about multi-GPU. Not sure it would matter much anyway. When I run premiere with my multi GPU rig it almost never touches the second GPU. However, running Nuke, Davinci, or Octane, I see both...
  4. winterwolf

    [SOLVED] Cinema 4D R22 and R23 Fail to load

    Wondering if anyone else is experiencing this problem where R22 will begin loading, but stick on "initalizing layout" forever. And R23 just crashes outright. Guessing there may be an Intel library it's looking for or something? Here's a shortened crash report. UPDATE: I replaced the...
  5. winterwolf

    Building Ultimate Hackintosh Ryzentosh compatibility check.

    Looks Like Morgonaut did it. Would like to know if you can get Thunderbolt to work on a TRX40.
  6. winterwolf

    Super dumb OpenCore question but can't seem to find the answer anywhere

    That worked! Knew it was something simple. Thanks @Shaneee
  7. winterwolf

    Super dumb OpenCore question but can't seem to find the answer anywhere

    When I first installed 0.5.6 back in the day, when I booted and the OpenCore menu popped up whatever I last selected would already be highlighted. This made it simple for me to boot, walk away, and when I came back it would be booted from the right disk. However, ever since I moved to 0.6.0, I...
  8. winterwolf

    Big Sur on X570 Creator (sleep/wake works)

    Good work on the Gigabyte. For now I'm stuck with the Creator. I am still having problems with the Aquantia 10GB port, even when I copied all the patches directly from the one config to the other. Then I tried using the EFI as is with added system info and npci=0x2000 since bios 3.10 doesn't...
  9. winterwolf

    looking to move to an Asrock X570 gaming + 3600xt setup

    1. I have only heard of a few rare cases where sleep works flawlessly. 2. I am not quite done with my EFI so haven't uploaded it to github yet, but you can find plenty on there if you just do a search. 3. Dortania is the definitive guide and every hackintosher should be very familiar with it.
  10. winterwolf

    Big Sur on X570 Creator (sleep/wake works)

    @CaseySJ & @Allubz nice work for continuing the path forward on this build. (y):p Just read through this thread and it's super helpful for some of the stuff I've been working on. Sorry I've been out of the discussion on this MB for so long but was working in actual work the last few months and...
  11. winterwolf

    Davinci Resolve crashing on start

    Lifesaver! Thank you!
  12. winterwolf

    USB HUB

    I can confirm that this is a problem specifically with High Sierra. Even the Apple keyboard I was using only shows up as a hub with none of the ports working for expansion. I spent 2 weeks troubleshooting the mouse not working, since it's receiver was plugged into the keyboard, and the keyboard...
  13. winterwolf

    High Sierra OpenCore Blinking Dash on Boot

    Is there a reason you are starting with High Sierra? In my experience High Sierra has way more issues than Catalina with install and getting things working. Since you have an AMD GPU it would only make sense to install the most recent OS. In fact, I might be able to dig up an EFI folder I used...
  14. winterwolf

    Perfect EFI compromised! Now no boot at all.

    Yes @Aluveitie you nailed the problem. Cmos reset. I'm good now. Any thoughts on if "Above 4G" or npci=0x2000 is better?
  15. winterwolf

    No keyboard support during install.

    This worked! Can't believe the amount of time and money I wasted trying to get High Sierra to install when all I needed to do was swap out the keyboard.
  16. winterwolf

    No Keyboard or Mouse at install screen

    Ok! That works! New keyboard and BOOM! Install. Thanks for your help. Will let you know if and when I get the GPU's up and running.
  17. winterwolf

    Perfect EFI compromised! Now no boot at all.

    Thanks @Shaneee Yeah man, thanks for that grounding moment. In my crazy going from one MB to the next and having countless EFI's and config.plists (very well organized, but a lot), I forgot that the MB had "above 4G" disabled and no npci=0x2000 in the plist. Enabled it and it fired right up...
  18. winterwolf

    ASRock X570 Creator Thunderbolt works...ish.

    That's great to hear! Glad you got it working.
  19. winterwolf

    Perfect EFI compromised! Now no boot at all.

    Stalling at kunk_alert 0 AMDCPUSupport : : start trying to init pci service... RTC: Only single RAM bank (128 bytes) Any ideas as to what this stall means? I had an ASRock Creator up and perfect with Catalina. I was working on getting High Sierra installed so I could use Nvidia for machine...
  20. winterwolf

    No keyboard support during install.

    As I said in my thread, this is great news and needs to be pinned at the top of the High Sierra forum if I and others can confirm. Did you get High Sierra up with Nvidia? I've never been able to complete an install or update without having an ATI card available to get it up and running to...
Top Bottom