Ryzen 7 3700x Gigabyte B550M Aorus Pro RX 580 Mojave 10.15.6 OC 0.6.1

sesewolf

New member
AMD OS X Member
Joined
Sep 8, 2020
Messages
6
  • Installed Operating Systems: Mojave 10.15.6 - Windows 10 LTSC
  • CPU: Ryzen 7 3700x
  • Motherboard: Gigabyte B550M Aorus Pro Bios F4
  • RAM: LPX 32GB DDR4 3000MHz CL16
  • Graphics: Sapphire Rx 580 Pulse
  • SSD: 970 EVO 500GB
  • LAN: RTL8118
  • Bootloader: OpenCore 0.6.1 iMacPro1,1
Everything works so far. OC 0.6.1 boots a little slower than 0.5.9.
For LAN don't go with the newest kext, it won't work on this board, get older one.

It's hard to OC with this board, a lot of CMOS reset needed, so I gave up for now.

Worst nightmare was to make Photoshop and Davinci to work, here are the fixes.

Photoshop fix:

Davinci fix:

Thanks to everyone who make this possible, especially for noobs like me ;)
 

sesewolf

New member
AMD OS X Member
Joined
Sep 8, 2020
Messages
6
Try with this one
 

Attachments

  • EFI.zip
    2.1 MB · Views: 108

mind

New member
AMD OS X Member
Joined
Sep 19, 2020
Messages
7
Hello
I am so glad to find a user who uses the same B550M AORUS PRO board.
Thank you so much for sharing the EFI file.
I booted with the EFI you shared,
4 USB2.0 ports are not recognized.
Are you well recognized?
Could you tell me how to do it to recognize 4 2.0 ports?
thank you.
 

ClashFarmer

New member
AMD OS X Member
Joined
Jun 10, 2020
Messages
6
My USB 2.0 ports do not work as well. Does the USB 3.2 and USB C ports work with the USB kext?
 

mind

New member
AMD OS X Member
Joined
Sep 19, 2020
Messages
7
My USB 2.0 ports do not work as well. Does the USB 3.2 and USB C ports work with the USB kext?
hi ClashFarmer!
I am in the same situation. I am looking for a solution because the usb2.0 port does not work.
Now waiting for sesewolf's reply.
Do you other parts work fine?
I'm working on x8 graphics instead of x16. Did you know?
 

mind

New member
AMD OS X Member
Joined
Sep 19, 2020
Messages
7
System Report shows my RX5700 as x16
hi, ClashFarmer
Really 16x?
Then I'm sure I'm wrong.
What is the Novabench graphics score?
I am not exceeding 30fps
The OpenCL score is coming out with 2353 GFLOPS.
I don't know what the hell is wrong.
 
Last edited:

ClashFarmer

New member
AMD OS X Member
Joined
Jun 10, 2020
Messages
6
Hey mind, I wiped my mac installation yesterday as I was having trouble with getting it to dual boot to Windows. I may try again later but for now I need windows more as it is my gaming rig.
 

ClashFarmer

New member
AMD OS X Member
Joined
Jun 10, 2020
Messages
6
Reinstalled Big Sur. Here is my Novabench. Hitting 60fps no problem...

]Screen Shot 2020-10-08 at 3.20.15 PM.png
 

sesewolf

New member
AMD OS X Member
Joined
Sep 8, 2020
Messages
6
Hello
I am so glad to find a user who uses the same B550M AORUS PRO board.
Thank you so much for sharing the EFI file.
I booted with the EFI you shared,
4 USB2.0 ports are not recognized.
Are you well recognized?
Could you tell me how to do it to recognize 4 2.0 ports?
thank you.

Hi, sorry didn't notice my usb 2.0 don't work too, to fix it usb mapping is needed I think, but I'm not competent enough.
 

mind

New member
AMD OS X Member
Joined
Sep 19, 2020
Messages
7
Hi, sorry didn't notice my usb 2.0 don't work too, to fix it usb mapping is needed I think, but I'm not competent enough.
hi, ClashFarmer
Thank you for your reply.
I can't figure out the 2.0 port.
Did you solve it?
If you use 2.0 ports,
Can you share usbport?
 

sesewolf

New member
AMD OS X Member
Joined
Sep 8, 2020
Messages
6
hi, ClashFarmer
Thank you for your reply.
I can't figure out the 2.0 port.
Did you solve it?
If you use 2.0 ports,
Can you share usbport?

Sorry, I didn't even try I don't need them for now. Hope someone here will help.
 

sesewolf

New member
AMD OS X Member
Joined
Sep 8, 2020
Messages
6

Attachments

  • Zrzut ekranu 2020-10-17 o 13.08.09.png
    Zrzut ekranu 2020-10-17 o 13.08.09.png
    33.3 KB · Views: 22

tony535

Member
AMD OS X Member
Joined
Jul 17, 2020
Messages
45
my score
 

Attachments

  • Screen Shot 2020-11-06 at 1.45.48 AM.png
    Screen Shot 2020-11-06 at 1.45.48 AM.png
    43.8 KB · Views: 21

shinigami91

New member
AMD OS X Member
Joined
Nov 19, 2020
Messages
1
hallo ,..
I have a problem with intermittent sound, I have tried to replace Applealc with Voodoo but the result is still the same, can you guys help me?
installed Operating Systems: Big Sur, Windows 10
CPU: Ryzen 5 5600x Motherboard: Gigabyte B550M Aorus Pro F11 RAM: 16GB Corsair Vengeance LPX Graphic: Sapphire RX 5600 XT
Bootloader: OpenCore v0.6.4 SMBIOS: iMacPro1,1
 

mattmaddux

New member
AMD OS X Member
Joined
Dec 22, 2020
Messages
1
Hi guys, so I also have this MB and I'm having a ton of trouble getting Big Sur installed. It's been many years since I've run a Hackintosh, so I've been out of the loop. I'm really glad to find there are others who are using my MB and having some success, because I'm really struggling.

I initially ran through the Dortania OpenCore guide and was able to get through the first step of the installer, but now when I boot OpenCore from USB, then try to continue the install from the internal drive, it just crashes and reboots seconds into trying to boot. Can't get any further.

I've tried the EFI posted above, but that actually won't get as far as I what I had put together. Looks like a very different Patch section of the config.plist.

What are you guys currently using for your EFI Partition? What about BIOS settings?

Here's my hardware:

CPU: Ryzen 7 3800x
Motherboard: Gigabyte B550M Aorus Pro (F11p BIOS Version)
Memory: 32GB Corsair Vengeance LPX DDR4 3200MHz - 4 x 8 GB
GPU: PowerColor Red Dragon Radeon RX 5600 XT 6GB
 
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.