FX6300 Nvidia GT 710 - Catalina - Opencore - Budget system

sam298

New member
AMD OS X Member
Joined
May 2, 2020
Messages
15
Hardware Specs:
Motherboard: GA-78LMT-USB3 Rev 5.0
CPU: FX-6300 (3.6Ghz bios settings)
SSD: PNY 120GB (Sata type AHCI in bios)
Graphics: Asus Nvidia GT 710 2GB
Memory: 8GB Crucial DDR3 1600
Bluetooth: Kensington USB
Monitor: 27" HD

Software Specs:
OS: Catalina 10.15.5 (No dual boot)
Bootloader: Opencore 0.5.8
Kexts: Lilu, WhateverGreen, VirtualSMC, AppleMCEReporterDisabler, NullEthernet, RealtekRTL8111, XLNCUSBFix, VoodooHDA, GenericUSBXHCI
APCI: ssdt-rmne.aml
Drivers: VBoxHfs, Openruntime
SMBIOS: iMacPro1,1

Working:
Stable and no issues
Internet, USB 3.0 at full speeds, USB 2.0 at 12 Mbps
Imessage, Icloud, Bluetooth
Analog and HDMI audio (VoodooHDA)
HDMI/DVI Graphics acceleration
Sleep, Shutdown, Safari Youtube, Apple TV+ (shikigva=256)

Not working:
Webcam - Mac detects, led lights come on but no video
Restart - System shuts down but won’t restart fan keeps running
USB Opencore boot - Tried legacy and uefi
 
Last edited:

rickgrames

New member
AMD OS X Member
Joined
Jun 2, 2020
Messages
5
Hola! podrias ayudarme? tengo el mismo mother con el procesador fx 4100 pero no me inicia desde el usb
 

maclinux1960

New member
AMD OS X Member
Joined
Jun 23, 2020
Messages
29
H
Hardware Specs:
Motherboard: GA-78LMT-USB3 Rev 5.0
CPU: FX-6300 (3.6Ghz bios settings)
SSD: PNY 120GB (Sata type AHCI in bios)
Graphics: Asus Nvidia GT 710 2GB
Memory: 8GB Crucial DDR3 1600
Bluetooth: Kensington USB
Monitor: 27" HD

Software Specs:
OS: Catalina 10.15.5 (No dual boot)
Bootloader: Opencore 0.5.8
Kexts: Lilu, WhateverGreen, VirtualSMC, AppleMCEReporterDisabler, NullEthernet, RealtekRTL8111, XLNCUSBFix, VoodooHDA, GenericUSBXHCI
APCI: ssdt-rmne.aml
Drivers: VBoxHfs, Openruntime
SMBIOS: iMacPro1,1

Working:
Stable and no issues
Internet, USB 3.0 at full speeds, USB 2.0 at 12 Mbps
Imessage, Icloud, Bluetooth
Analog and HDMI audio (VoodooHDA)
HDMI/DVI Graphics acceleration
Sleep, Shutdown, Safari Youtube, Apple TV+ (shikigva=256)

Not working:
Webcam - Mac detects, led lights come on but no video
Restart - System shuts down but won’t restart fan keeps running
USB Opencore boot - Tried legacy and uefi

Hello sam298,

can you share your config.plist and your ssdt-rmne.aml that you use?
I have the same CPU and GPU, but with my Mobo I have not the full USB Speed
for USB 3.0 and USB 2.0.

Greetings from Germany, maclinux1960
 
Last edited:

sam298

New member
AMD OS X Member
Joined
May 2, 2020
Messages
15
H


Hello sam298,

can you share your config.plist and your ssdt-rmne.aml that you use?
I have the same CPU and GPU, but with my Mobo I have not the full USB Speed
for USB 3.0 and USB 2.0.

Greetings from Germany, maclinux1960

My plist (clover and opencore) are posted here
To get usb 3.0 speeds via usb 3.0 ports, you need only xlncusbfix kext.
To get usb 2.0 speeds via usb 3.0 ports using usb 2.0 drives, you can use a usb 3.0 hub or use genericusbxhci.kext

ssdt-rmne.aml is needed only for imessage fix only. You can read and get the aml from here
 

sam298

New member
AMD OS X Member
Joined
May 2, 2020
Messages
15
Hola! podrias ayudarme? tengo el mismo mother con el procesador fx 4100 pero no me inicia desde el usb
Follow the amd guide. I am not sure what the issue is. You have to use usb 2.0 port initially for the usb installer and when it boots, if you see ++++, swap the usb drive to an usb 3.0 port
 

maclinux1960

New member
AMD OS X Member
Joined
Jun 23, 2020
Messages
29
Hello sam298,

thankyou for writing me where and how I can go the same way to fix my Problems.
When I'm done, I will give a short Report what worked and what not.

Regards, maclinux1960
 

rickgrames

New member
AMD OS X Member
Joined
Jun 2, 2020
Messages
5
[QUOTE = "sam298, publicación: 3211, miembro: 156"]
Sigue la guía de amd. No estoy seguro de cuál es el problema. Debe usar el puerto usb 2.0 inicialmente para el instalador usb y cuando se inicia, si ve ++++, cambie la unidad usb a un puerto usb 3.0
[/CITAR]
Hgracias por responder. He probado todos los puertos y nada. Lo que he hecho es seguir la guia para sistemas heredados con duet.pkg, pero estoy confundido. Instalo duetpkg en my usb pero no comprendo como instalar luego macOs. Se agradece todoa ayuda.
 
Top Bottom
  AdBlock Detected
Sure, ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of our website. For the best possible site experience please take a moment to disable your AdBlocker.